EGO LMX5300SP-FC Lawn Mower Manual

The EGO LMX5300SP-FC is a 56V Cordless Self-Propelled Lawn Mower featuring a 21-inch steel deck, variable speed self-propel drive, 7-position height adjustment, weather-resistant construction, and compatibility with EGO 56V ARC Lithium batteries. It includes a battery, charger, grass bag, side discharge chute, and mulching plug. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Battery & Charging 7. Mowing Operation 8. Height Adjustment & Modes 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 21-inch steel cutting deck, Self-Propel Drive Control, Height Adjustment Lever, Battery Port, Charger, Grass Bag, Side Discharge Chute, Mulching Plug.

FeatureDescription
56V ARC Lithium BatteryHigh-capacity, fast-charging battery system
Self-Propel DriveVariable speed control for easy maneuvering
7-Position Height AdjustmentAdjust cutting height from 1.5 to 4 inches
21-Inch Steel DeckDurable construction for consistent cutting
Single Lever Height AdjustQuickly adjust all four wheels simultaneously
Weather-Resistant DesignSuitable for use in damp conditions
3-in-1 VersatilityBag, mulch, or side discharge capability
Battery Fuel GaugeDisplays remaining battery charge
Safety KeyPrevents accidental start-up
Foldable HandleFor compact storage

Assembly Instructions

Unpack and inspect all contents. Assemble on a flat, stable surface.

  1. Attach the handle: Align handle brackets with deck mounts, secure with provided bolts and wrench.
  2. Install the grass bag: Attach bag support frame to rear deck, hook bag onto frame.
  3. Attach side discharge chute: If using side discharge, secure chute to discharge opening.
  4. Install mulching plug: For mulching, insert plug into rear discharge opening.
  5. Insert battery: Place battery into battery port until it clicks.

WARNING! Ensure mower is powered off and battery is removed during assembly. Tighten all fasteners securely.

First-Time Setup

Prepare mower for initial use.

  1. Charge battery fully: Connect charger to battery and AC outlet; charge until indicator shows full.
  2. Adjust cutting height: Set height lever to desired position (recommend 2.5-3 inches for first mow).
  3. Select mowing mode: Install grass bag, mulching plug, or side discharge chute as needed.
  4. Insert safety key: Place safety key into slot near handle.

CAUTION! Clear mowing area of debris, stones, and obstacles before operation. Wear appropriate safety gear.

Specifications

Controls and Settings

Handle Controls: START/STOP lever, Self-Propel Drive Control, Height Adjustment Lever.

Operation: Press and hold START lever to engage blade; release to stop. Squeeze Self-Propel Drive Control to move forward; release to stop drive. Adjust speed with pressure on control.

Height Adjustment: Move lever to one of 7 positions (1.5", 2", 2.5", 3", 3.5", 4"). Battery: Insert/remove with release button; check fuel gauge for charge level. Safety Key: Remove to prevent unauthorized use.

Battery & Charging

Use only EGO 56V ARC Lithium batteries and charger.

  1. Charging: Connect charger to battery; plug into 120V outlet. LED indicates charging status.
  2. Battery Care: Store in cool, dry place. Avoid extreme temperatures.
  3. Fuel Gauge: Press button on battery to display charge level (LEDs: 4=full, 1=low).

Tip: For longest life, charge battery after each use. Do not store depleted battery for extended periods.

Mowing Operation

Supports bagging, mulching, and side discharge.

  1. Start mower: Insert safety key, press and hold START lever.
  2. Engage self-propel: Squeeze drive control to desired speed.
  3. Mow in overlapping passes: For even cut, overlap each pass by a few inches.
  4. Empty bag: When bag full indicator shows, stop mower, remove and empty bag.
  5. Change modes: Stop mower, install appropriate accessory (bag, plug, or chute).
  6. Stop: Release START lever; blade stops within 3 seconds. Remove safety key.

WARNING! Keep hands and feet away from cutting deck. Do not mow on slopes greater than 20 degrees.

Height Adjustment & Modes

Height Adjustment: Use lever to set cutting height; ensure all wheels are at same setting. Mowing Modes: Bagging (collects clippings), Mulching (returns clippings to lawn), Side Discharge (ejects clippings to side).

Care & Maintenance

After each use: Clean underside of deck, check for damage, store in dry place. Periodically: Inspect blade for sharpness/damage, tighten fasteners, lubricate wheel axles if needed.

CAUTION! Always remove battery before cleaning or maintenance. Use only mild soap and water; do not use high-pressure spray.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. Copyright © 2023 EGO Power+; trademarks of Chervon North America, Inc. For support, visit www.egopowerplus.com or contact 1-855-EGO-5656. Battery disposal: Recycle according to local regulations.

Troubleshooting

SymptomPossible CauseCorrective Action
Mower won't startSafety key/batteryInsert safety key; ensure battery is charged and properly inserted.
Poor cutting performanceDull blade/height settingSharpen or replace blade; adjust cutting height higher.
Self-propel not workingDrive control/obstructionCheck drive control cable; clear debris from wheels.
Battery not chargingCharger connection/temperatureEnsure secure connections; charge in 40-100°F environment.
Uneven cuttingDeck level/wheel heightLevel deck; ensure all wheels at same height setting.

Reset: Remove battery for 30 seconds, then reinsert.

Service: 1-855-EGO-5656; www.egopowerplus.com

EGO LMX5300SP-FC Lawn Mower Manual © - All Rights Reserved 2025