EGO POWER Z6ZTR Lawn Mower Manual

The EGO POWER Z6ZTR is a 56V Lithium-ion battery-powered zero-turn riding lawn mower featuring a 42-inch cutting deck, zero-turn maneuverability, LED headlights, electric start, adjustable cutting height (1.5" to 4.5"), washout port for deck cleaning, 6-gauge steel construction, dual-lever steering control, cruise control, cup holder, and compatibility with EGO POWER+ batteries (recommended 4x 12.0Ah batteries for full runtime). Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Battery Installation & Charging 7. Mowing Operation 8. Safety Features 9. Maintenance & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Zero-turn steering levers, 42-inch steel cutting deck, Battery compartments, LED headlights, Washout port, Cup holder, Electric PTO (Power Take-Off) switch.

FeatureDescription
Zero-turn steering leversIndependent control for each drive wheel for precise maneuverability
42-inch cutting deck6-gauge steel construction with mulching and side-discharge capabilities
Battery compartmentsHolds up to 6 EGO 56V ARC Lithium batteries (4 required for operation)
LED headlightsFor low-light mowing conditions
Washout portFor connecting garden hose to clean underside of cutting deck
Cup holderConvenient beverage holder
Electric PTO switchEngages and disengages blade rotation
Cruise controlMaintains constant speed without holding levers forward
Adjustable seatFor operator comfort
Parking brake leverLocks drive system when parked

Assembly & Setup

Unpack and inspect all parts. Assembly requires two people.

  1. Install steering levers: Attach to control panel with provided bolts.
  2. Attach seat: Mount seat onto frame using included hardware.
  3. Install battery trays: Secure battery compartments in designated slots.
  4. Connect wiring: Route and connect headlight and PTO switch wiring harnesses.
  5. Install cutting deck: Attach deck to mower frame with suspension pins and belts.
  6. Check tire pressure: Inflate all tires to 15 PSI.

WARNING! Mower is heavy; use proper lifting techniques. Ensure all bolts are tightened to specified torque.

First-Time Operation

Before first use, fully charge all batteries and perform pre-operation checks.

  1. Battery installation: Insert 4 fully charged 56V batteries into compartments.
  2. Seat adjustment: Adjust seat forward/backward for comfortable reach to controls.
  3. Cutting height adjustment: Set all deck wheels to same height (1.5" to 4.5").
  4. Safety check: Ensure parking brake is engaged, PTO is off, and levers are in neutral.
  5. Power on: Turn key to ON position; check battery charge indicator.
  6. Test operation: In open area, practice maneuvering without engaging blades.

CAUTION! Never operate without proper training. Keep bystanders away.

Specifications

Controls and Settings

Operator station: Key switch, PTO switch, Steering levers, Parking brake, Cruise control, Cup holder, Battery charge indicator.

Steering Levers: Push forward to go forward, pull back to reverse/reverse; outward to turn. PTO Switch: Engages/disengages cutting blades. Parking Brake: Engage before dismounting. Cruise Control: Set speed with lever lock. Cutting Height: Adjust via deck lift lever (located near seat).

Settings: Battery indicator shows charge level; LED headlights have ON/OFF switch; reverse operation can be enabled/disabled via key sequence.

Battery Installation & Charging

Requires 4 EGO 56V ARC Lithium batteries (sold separately). Compatible with 5.0Ah, 7.5Ah, 10.0Ah, 12.0Ah batteries.

  1. Install batteries: Insert fully charged batteries into all 4 slots until they click.
  2. Charge batteries: Remove batteries and charge using EGO rapid charger.
  3. Battery care: Store in cool, dry place; avoid extreme temperatures.
  4. Battery indicator: Check LED lights on batteries or dashboard display.

Tip: For maximum runtime, use 4 identical high-capacity batteries (12.0Ah recommended).

Mowing Operation

Supports mulching, side discharge, and bagging (with optional bagger attachment).

  1. Pre-start check: Clear mowing area of debris; check tire pressure; ensure deck is clear.
  2. Start mower: Sit on seat, engage parking brake, turn key to ON.
  3. Engage blades: Move PTO switch to ON position.
  4. Begin mowing: Release parking brake, slowly push steering levers forward.
  5. Turning: Move one lever outward while keeping other neutral for zero-turn.
  6. Cruise control: Engage lever lock to maintain speed on straightaways.
  7. Slope operation: Mow across slopes, not up and down (max 15-degree slope).
  8. Finish mowing: Disengage PTO, engage parking brake, turn key to OFF.

WARNING! Always look behind before backing up. Keep hands and feet away from moving parts.

Safety Features

Operator Presence System: Blades stop if operator leaves seat. Reverse Caution Mode: Requires key sequence to mow in reverse. Parking Brake: Must be engaged to start. Blade Brake: Stops blades within 3 seconds of disengagement.

Maintenance & Storage

After each use: Clean deck with washout port, check blades for damage, wipe down mower.

Monthly: Check belt tension, lubricate pivot points, inspect tire pressure.

Seasonal: Sharpen or replace blades, check battery health, store in dry location.

Winter Storage: Fully charge batteries, store separately in climate-controlled area.

CAUTION! Always disconnect batteries before performing maintenance.

Regulatory Information

EPA Certified: Zero emissions. UL Certified: Meets safety standards for battery systems. Copyright © 2023 EGO POWER+; trademarks of Chervon North America, Inc. For support, visit www.egopowerplus.com or contact 1-855-EGO-5656. Battery recycling: Return spent batteries to authorized EGO dealer.

Troubleshooting

SymptomPossible CauseCorrective Action
Mower won't startBattery/Parking brakeEnsure batteries are charged and installed; parking brake engaged; seat occupied.
Blades won't engagePTO switch/Deck obstructionCheck PTO switch connection; clear debris from deck; ensure operator is seated.
Uneven cuttingDeck level/Tire pressureLevel cutting deck; check tire pressure; sharpen blades.
Reduced runtimeBattery age/ConditionsUse fully charged high-capacity batteries; avoid wet/heavy grass.
Steering difficultyLinkage adjustmentCheck steering linkage for obstructions; adjust neutral position.

Reset: Turn key OFF, remove batteries for 5 minutes, reinstall.

Service: 1-855-EGO-5656; www.egopowerplus.com

EGO POWER Z6ZTR Lawn Mower Manual © - All Rights Reserved 2025